DISCLAIMER

All rights of photos and text reserved. Usage of photos or text from my blog on other websites or for any other purpose only with prior permission. If you want to use any material from my blog please contact me by email.

Sunday, October 18, 2015

211 -The Next Generation- Part 13 : 6HS5/211, Layout

Hi!

Not only the 211/211 and 801A/211 amps got a fresh design, also the 211 mono blocks with 6HS5 driver are being redone.




The 211 mono blocks with 6HS5 driver are currently my entry level version in terms of 211 amplification. Although the design of the previous version received a lot of praise, I need to redo it since I am running out of stock of the capacitors used. The capacitors were mounted on the top of the amp and were a major part of the visual look of the amps.





The new version uses the caps shown above. This is a mix of caps which are not easily arranged on the top of the amplifier chassis. So instead I decided to place almost all the transformers on chokes on the top and move the caps inside. This heap of iron needs to find a space on the amps:




All the iron will be placed under transformer covers. Two large covers are needed for the main power transformer and for the output transformer. The rest can be placed under 120mm covers. This is the arrangement I came up with:




The 120mm covers are now also available in a version which is higher, just as high as the 150mm covers, so a uniform look can be achieved if they are combined.




The metal pate for this has been designed already:




The two small plates are for the mounting of the sockets of the 6HS5 driver and 6CG3 rectifiers. The assembly of the amp will be shown in an upcoming post. Stay tuned!

Best regards

Thomas

No comments:

Post a Comment